Imagen1

Introduction

  • Energy Sistem® thanks you for buying your new Headphones BT2 Bluetooth; we hope you enjoy them.
  • Take these foldable Bluetooth headphones with you wherever you go and follow the latest trends with the touch of colour of your Headphones BT2 Bluetooth. Answer phone calls and control your music playback with just one click.
  • We suggest you to read this user manual to get the most out of your product safely and to use all of its features.

Care and Maintenance

  • Do not expose your Headphones BT2 Bluetooth to shock, dust, humidity or high temperatures.
  • Do not use corrosive or abrasive cleaning products.
  • Do not place your Headphones BT2 Bluetooth close to devices with strong magnetic fields.
  • Keep your headphones clean and dust-free them with a soft, dry cloth.
  • Do not disassemble the device. Any repair must be done exlusively by qualified personnel of Energy Sistem Soyntec S.A.
  • Be sure to keep your Headphones BT2 Bluetooth turned off while you are not using them.
  • Charge the lithium battery when run out of charge to lengthen its life.

    Features

General Features

  • Bluetooth V4.0 headphones.
  • Easy synchronization without pairing codes.
  • Up to 10m of range.
  • Rechargeable battery with up to 10 hours autonomy.
  • Built-in noise-cancelling microphone.
  • Control talk function for answering phone calls and controlling your music directly from the headphones.
  • Compatible with most operating systems.
  • Transport them comfortably with their folding system.

Technical Features

  • Bluetooth Version: 4.0.
  • Working range: 10m.
  • Diaphragm diameter: 40mm.
  • Frequency response: 20Hz-20KHz.
  • Speaker Sensitivity: 100dB ± 3dB.
  • Total Harmonic Distortion: <1%.
  • Microphone Frequency Response: 200Hz-8KHz.
  • Microphone Sensitivity:-38db ± 3db.
  • Carrier Frequency: 2.402GHz-2.480GHz.

Specifications of lithium battery:

  • Battery Type: Polymer.
  • Battery capacity: 200mah.
  • Charging time: About 3 hours.
  • Playback Autonomy: 10 hours. *
  • Operating current: 20mA.
  • Standby current: 0.01-10mA.
  • Power off current: 1uA.
  • Charging current: 90-110mA.



*The battery life is approximate. Higher volume on headphones means increased battery consumption.

Content

  • Headphones BT2 Bluetooth.
  • Micro-USB battery charger cable.
  • Quick Start Guide.

General Overview
1. Multifunction Button
2. Backward
3. Forward
4. Volume +
5. Volume -
6. USB Connection
7. Microphone		 Imagen1

Main Functions

Turn on / off your device

To turn on and off your device use the multifunction button (1).

Press that button for about 3 seconds to turn on the device. The LED placed behind that button will start flashing. In case your headphones were already paired with another bluetooth device, they will try to connect to it. If the connection fails, they will enter pairing mode.

To turn off your device, press the multifunction button (1) again for about 5 seconds.

Charging the battery

When there are about 15 minutes left, the headphones will emit a beep sound to warn you. This sound will repeat every minute until the battery runs out.

Note: It is recommended to turn off the device when charging. Do not store or leave unused for a long period of time with the battery completely discharged.

Bluetooth Pairing

With your Headphones BT2 Bluetooth turned off, press the multifunction button (1) for 3 seconds and they will automatically enter pairing mode.

At the same time, use the search function from your bluetooth device and once your Headphones BT2 Bluetooth apear on the list, select "connect". The synchronization will start automatically without the need of any pairing code.

Once both devices are paired, the LED behind the multifunction button will start flashing slowly.

In case you want to pair with another device, there is no need to turn off and on your Headphones BT2 Bluetooth again. Just press and hold the multifunction button for abour 2 seconds and they will enter into paring mode, breaking the connection with the previous device.

If you lose the connection while having paired your device because you are out of range, you will be able to reconnect your Headphones BT2 Bluetooth by clicking the multifunction button (1) once.

Talk Control

With the Headphones BT2 Bluetooth paired to your smartphone or tablet, you will be able to receive and answer phone calls with its built-in microphone (8).

To answer phone calls simply press the multifunction button (1) once. In case you are listening to a song when receiving a phone call, the music will stop automatically and you will hear a ring tone.

Press the multifunction button (1) again to end the phone call; the song you were listening to will resume from where it stopped when you received the phone call.

In case you are not able answer a phone call, you can reject it by pressing the multifunction button (1) for 3 seconds.

Recall

With your Headphones BT2 Bluetooth you will be able to repeat the last phone call registered on your smartphone. To do so, press the multifunction button (1) twice and it will automatically make the phone call.

Play Control

Once you have paired your Headphones BT2 Bluetooth, you will be able to control basic playback options directly from the headphones.

To forward or backward one song press the forward(2) or backward(3) buttons once. If you want to change the volume level, press the "Volume -" (4) or "Volume +" (5) buttons as many times as needed to reach the desired volume level. Once you reach the maximum volume level you will hear a beep sound throught the headphones.

To pause and resume, press the multifunction button (1) once.

Warranty

Energy Sistem Soyntec SA is liable for any lack of conformity which exists at the time the goods were purchased during a period of 36 months. Batteries are excluded from the 36-month warranty, having a warranty
period of 12 months.

This warranty covers any defects in workmanship or materials. This warranty does not cover any product failure due to accidents, misuse or
alteration made by an unauthorized person.

The special 36-months warranty is valid for the European Union. For other countries, please refer to your specific legislation or your local distributor.

Warranty Procedure

  1. Visit the Support section at http://support.energysistem.com and select your product to view the FAQ (Frequently Asked Questions), user manuals, drivers and available updates, as the possibility to submit a query to the Technical Service or consult the warranty. You can check the availability of the user manual in your language at http://www.energysistem.com/en-en/support/manuals
  2. Alternatively, you may prefer to contact the distributor from which you purchased the product, presenting the purchase receipt or invoice.

Specifications are subject to change without notice.

Trademarks. All company, brand and product names are trademarks or registered trademarks of their respective companies.

© 2014 by Energy Sistem Soyntec S.A. All rights reserved.

Declaration of Conformity

Manufacturer Name: Energy Sistem Soyntec S.A.
Address: Pol. Ind. Finestrat C/. Calpe, 1 - 03509 Finestrat Alicante (Spain).
Tel: 902 388 388 // Fax: 902 119 034 // NIF: A53107488

We declare under our own exclusive responsibility that the product:

Headphones BT2 Bluetooth

Manufacturing Country: China
Is in compliance with the essential norms and standards of the Directive 1999/5/EC of the European Parliament and of the Council of March 09th 1999.
Imagen1 This symbol on the product or the instructions means that your electrical and electronic equipment should be disposed, at the end of its life, separately from your household waste. For more information, please contact the local authority or dealer where you purchased the product.