Introduction

  • Thank you for your trust in our company and for buying the new Headphones BT Travel 7 ANC. We hope you enjoy them.
  • We recommend you to read this manual in order to enjoy your device safely and with maximum performance.

Care and maintenance

  • Do not expose your Headphones BT Travel 7 ANC to impacts, dust, humidity or high temperatures.
  • Do not use neither corrosive nor abrasive cleaning products.
  • Keep the headphones clean and free of dust using a soft dry cloth.
  • Do not disassemble your headphones. All reparation works should be carried out exclusively by qualified staff of Energy Sistem Technology, S.A.
  • Do not leave the battery completely discharged for a long period of time.

Features

  • Headphones with Active Noise Cancelling technology to reduce background noise and let you enjoy every music detail.
  • Bluetooth 4.1 to play music wirelessly.
  • Self-adjusting headband and slim design with ear pads that fit your ears perfectly.
  • Control playback: turn the volume up or down, switch to the next or previous track and answer incoming calls with the built-in microphone.
  • Versatility to carry them around: folding system, 90-degree rotating ear pads and carrying case to store them anywhere.
  • Lithium-polymer battery with up to 27 hours of battery life.
  • Connect them to any device using the removable audio cable.

Technical specifications

  • CONNECTIVITY
  • Bluetooth: 4.1
  • Range: 10 m
  • Operating frequencies: 2.4 GHz

  • Maximum output signal: < 20 dBm

  • DRIVERS:
  • Neodymium magnet
  • Frequency response: 20 - 20,000 Hz
  • Driver diameter: 40 mm
  • Sensitivity: 105 ± 3 dB/mW (@1 KHz)
  • SPL: 115 ±3 dB
  • Maximum power: 10 mW
  • Design: Closed design
  • Type: Dynamic
  • Impedance: 32 ohms
  • THD < 1%

  • ANC: up to -20 dB reduction at a frequency between 20 and 1000 Hz

  • CABLE
  • Length: 120 cm

  • Connector: 3.5 mm mini jack

  • MICROPHONE:

  • Sensitivity: -42 dB ± 3 dB (@1 kHz)

  • Battery:
  • Capacity: 500 mAh
  • Type: Li-Po
  • Battery life:
  • Battery life @ 50% volume: 27 hours
  • Battery life @ 70% volume: 20 hours
  • Battery life @ 100% volume: 15 hours
    • Bluetooth ON + ANC ON: 16 hours
    • Line-in + ANC ON: 16 hours
    • ANC ON (Without music): 50 hours
  • Charging port: MicroUSB (Type B)

  • Charging time: 3 hours

  • OTHER FEATURES

  • Compatible with most popular smartphones on the market.

Product content

  • Headphones BT Travel 7 ANC
  • MicroUSB charging cable
  • Audio cable
  • Carrying case
  • Quick guide

Buttons and ports

  1. VOLUME +/ NEXT
  2. MULTIFUNCTION BUTTON
  3. VOLUME - / BACK
  4. STATUS INDICATOR
  5. CHARGING PORT
  6. MICROPHONE
  7. ANC BUTTON
  8. AUDIO INPUT
  9. ANC INDICATOR

Main functions

Switching on and off the device

Press and hold the MULTIFUNCTION BUTTON (2) for 2 seconds to turn on your Headphones BT Travel 7 ANC. You will hear a confirmation sound and the STATUS INDICATOR (4) will glow blue. The STATUS INDICATOR (4) will keep flashing blue while your Headphones BT Travel 7 ANC are on. Press and hold the MULTIFUNCTION BUTTON (2) for 2 seconds to turn off your Headphones BT Travel 7 ANC. You will hear a sound when turning off the headphones.

Charging the battery

When the battery level is below 10%, the STATUS INDICATOR (4) will flash red and you will hear a sound to remind you to charge the battery.

The STATUS INDICATOR (4) will glow red while charging the device and will turn blue once the charging process has been completed. Plug the microUSB end of the USB cable provided into the CHARGING PORT (5) of your headphones and the other USB end into any device with an USB charging port that provides energy (PC, USB wall charger, car charger, etc) to charge the battery. The charging time is approximately 3 hours.

Important considerations:

  • Do not store or leave your device unused or completely discharged for a long period of time.

Bluetooth pairing

Once your Headphones BT Travel 7 ANC are off, press and hold the MULTIFUNCTION BUTTON (2) for approximately 4 seconds, until the STATUS INDICATOR (4) starts flashing blue and red. At this point, your headphones and your Bluetooth device can be paired. Once Headphones BT Travel 7 appears on your devide screen, press "connect". You will hear a sound that confirms that both devices have been paired correctly.

If you previously paired your Headphones BT Travel 7 ANC with your music player, they will connect automatically next time. In case that you want to pair them with another device, repeat the pairing process (press and hold the MULTIFUNCTION BUTTON (4) for 4 seconds)

Bluetooth playback control

Once your Headphones BT Travel 7 ANC are syncronized, you will be able to control basic playback functions such as turning up and down the volume and switching to the next or previous song directly from your headphones.

Press VOLUME + (1) and VOLUME - (3) to turn up and down the volume respectively. You will hear a sound when reaching the maximum and minimum volume levels.

Press and hold NEXT (1) to switch to the next song. You can also press and hold BACK (3) to go back to the previous song.

Press the MULTIFUNCTION BUTTON (2) once to pause or resume playback.

  • If you are using the audio cable instead of the Bluetooth connection, you will have to use your music player to control music playback and not the headphones.

ANC system

Press the ANC BUTTON (7) to make the most of your music or to block background noise. Your Headphones BT Travel 7 ANC provide active noise reduction and the ANC INDICATOR (9) will light green while this mode is on.

Experience active noise reduction, especially at low frequencies, with a decrease of up to 20 dB. This mode is particularly useful in noisy environments such as the city or when travelling by plane.

You can also use the ANC mode when playback is off. Put your Headphones BT Travel 7 ANC on any time and press the ANC BUTTON (7).

Call control

Once your Headphones BT Travel 7 ANC and smartphone are synchronized, you will be able to answer calls thanks to the built-in MICROPHONE (6) while wearing your headphones.

Press the MULTIFUNCTION BUTTON (2) to answer an incoming call. If you are listening to music when you receive a call, playback will pause and you will hear an incoming call sound. You can also press and hold this button for 2 seconds to reject an incoming call.

Press the MULTIFUNCTION BUTTON (2) again to end a call. Playback will resume from the point when the music stopped.

Audio input

If you don't want to use the Bluetooth connection, you can also connect your Headphones BT Travel 7 ANC to your music player using the audio cable provided. You don't need to switch on your headphones if you want to use the audio cable.

Simply plug one cable end into the AUDIO INPUT (8) and the other end to your music player to enable this mode.

You can also enable ANC mode while listening to music via audio cable. Please take into account that this mode will use up the battery and may not be enabled if the battery is completely discharged.

  • If you are using the audio cable instead of the Bluetooth connection, you will have to use your music player to control music playback and not the headphones.

Warranty

Energy Sistem Technology, S.A. is liable for any lack of conformity that exists at the time the goods are purchased during a period of 36 months. Batteries are excluded from the 36 month warranty, having a warranty period of 24 months. This warranty covers any defects in workmanship or materials and does not cover any product failure due to accidents, misuse or alteration made by an unauthorized person.

The special 36 month warranty is valid for the European Union. For other countries please refer to your specific legislation or your local distributor.

Warranty procedure

Please visit www.energysistem.com/en/support and select your product to view the FAQ (Frequently Asked Questions), user manual, quick guide, drivers and updates available as well as to submit a query to our Technical Support or manage the warranty. You may also contact the distributor that sold the product by presenting the purchase receipt or invoice.

Trademarks

All company, brand and product names are trademarks or registered trademarks of their respective companies. Specifications are subject to change without notice.

© 2018 by Energy Sistem Technology, S.A. All rights reserved.

Declaration of conformity

Issuer?s name: Energy Sistem Technology, S.A.
Address: C/ Calpe, 1 - 03509 Finestrat, Alicante (Spain)
Tel: +34 966 830 324
CIF: A53107488

We declare under our own exclusive responsibility that the product:

  • Description: Wireless headphones
  • Brand: Energy Sistem
  • Model: Headphones BT Travel 7 ANC
  • Manufacturer: Energy Sistem Technology, S.A.
  • Manufacturing country: China

referred to in this declaration is in compliance with the essential norms and standards

EN55032:2015
EN55024:2010

in conformity with the provisions of the Directive 2014/30/EU of the European Parliament and of the Council of 26th February 2014 and

EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN301 489-1 V2.1.1
EN301 469-17 V3.1.1
EN300 328 V2.1.1
EN62479:2010

in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 16th April 2014.

Finestrat, 15th May 2018

Imagen1

Marco Antonio Velázquez Fierro
Product Management Director