Introduction
- Thank you for your trust in our company and for buying your new Headphones. We hope you enjoy them.
- We recommend you to read this quick guide to familiarize yourself with your headphones before using them.
Care and maintenance
- Do not expose your headphones to impacts, dust, humidity or high temperatures.
- Do not use neither corrosive nor abrasive cleaning products.
- Do not disassemble the device. All modifications are to be carried out exclusively by qualified staff of Energy Sistem Technology, S.A.
- Avoid pulling and twisting cables to extend the life of your headphones.
- We strongly recommend not to bend the headband excessively and not to force any adjustable elements.
General overview
- Plug the 3.5 mm JACK CONNECTOR (3) of your headphones into the headphones input of the device that you are using to play your music.
- Press the MICROPHONE (4) button to control the playback of your music. Press this button once to pause/ resume playback. Press it twice to move to the next track. Press it three times to move to the previous track.*
- You can change the size by means of the HEADBAND's adjustable elements (2)

- Driver
- Headband
- 3.5 mm jack connector
- Microphone
Call control*
You will be able to control your calls from your headphones if you plug them into your mobile phone.
Answer a call
Press the MICROPHONE (4) button once to answer an incoming call.
End a call
Press and hold the MICROPHONE (4) button for approximately 2 seconds to end a call.
Reject a call
Press and hold the MICROPHONE (4) button for approximately 2 seconds to reject a call.
*Controls may vary depending on the settings of the device that you are using to play your music.
Safety
- Before using the headphones, turn the volume down and turn it up slowly until desired music level is achieved.
- Avoid noisy environments that force you to turn up the volume really high when using your headphones.
- Listening to loud music through headphones over a long period of time may cause your ears to get used to high volume levels, resulting in irreversible hearing loss.
- Adjust the volume of your headphones to be able to hear important external sounds.
Warranty
You can check the warranty terms here:
https://www.energysistem.com/terms-warranty
Declaration of conformity
Issuer?s name: Energy Sistem Technology, S.A.
Address: C/ Calpe, 1 - 03509 Finestrat, Alicante (Spain)
Tel: +34 966 830 324
CIF: A53107488
We declare under our own exclusive responsibility that the product:
Description: Headphones
Brand: Energy Sistem
Manufacturer: Energy Sistem Technology, S.A.
Manufacturing country: China
referred to in this declaration is in compliance with the essential norms and standards:
EN 55032:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55035:2017
in conformity with the essential norms and standards of the Directive EMC 2014/30/EU of the European Parliament and of the Council of 26th February 2014.
Finestrat, 1 September 2019

Javier Álvarez Rodríguez
Innovation and Technology Director
