Listening to loud music can cause irreversible hearing loss. To avoid hearing damage, we recommend the following guidelines:
For safety reasons and to avoid possible accidents, we recommend the following safety measures:
Do not use the headphones while driving or carrying out any other activity that requires special attention.
Important: We recommend trying out the provided ear tips in different sizes to choose the ones that fit your ears best. Using ear tips that don?t fit correctly may have an impact on the perceived sound quality.
To turn on your device, press and hold the MULTIFUNCTION BUTTON (1) for 2 seconds and the LED INDICATOR (4) will light white. You will hear a confirmation sound when you switch it on. The LED INDICATOR (4) will keep flashing white as long as the device is on.
To turn off your device, press and hold the MULTIFUNCTION BUTTON (1) for 3 seconds. You will hear a sound when switching off the earphones.
When the battery level is below 10%, the LED INDICATOR (4) will flash white. You will also hear a sound to remind you to charge the battery through the CHARGING PORT (5).
Plug the USB Type-C end of the included USB cable into the CHARGING PORT (5) and connect the other USB end to any device with a USB charging port that provides energy (PC, USB wall charger, car charger, etc) to charge the battery.
The LED INDICATOR (4) glows white while charging the device and turns off once the charging process has been completed.
Important: We recommend not leaving your Earphones Bluetooth Sport 1+ unused for long periods of time with an empty battery. We advise charging the battery at least once a month.
Caution: Avoid getting the openings and the charging connectors wet.
Note: After any exercise, it is recommended to dry the headphones thoroughly before charging.
Switch on your Earphones Bluetooth Sport 1+ and wait for approximately 4 seconds until the LED INDICATOR (4) starts flashing white. At this point, your earphones start searching for devices and can be paired with your music player. Once "Energy Sistem EP Sport 1+" appears on your devide screen, press "connect". Both devices will be connected immediately and without codes. You will hear a sound that confirms both devices have been paired correctly.
To pair your earphones with the same music player once again, you don?t need to repeat the steps above. Just leave Bluetooth enabled on your music player and switch on your Earphones Bluetooth Sport 1+. They will sync automatically.
Press and hold the MULTIFUNCTION BUTTON (1) for 8 seconds to disconnect the devices and pair your earphones with a new device.
Press the VOLUME + (3) or VOLUME - (2) buttons to adjust the playback volume. You will hear a beep when reaching the maximum volume.
Press the MULTIFUNCTION BUTTON (1) to pause or resume playback.
Press NEXT (3) or BACK (2) for 2 seconds to skip to the next or previous track.
Once the Earphones Bluetooth Sport 1+ and your smartphone are synchronised, you can control calls from the earphones.
Press the MULTIFUNCTION BUTTON (1) once to answer a call.
Press the MULTIFUNCTION BUTTON (1) once to end a call.
Press the MULTIFUNCTION BUTTON (1) for approximately 2 seconds to reject an incoming call.
You can interact with your smartphone voice assistant using your Earphones Bluetooth Sport 1+. To do so, press the MULTIFUNCTION BUTTON (1) twice. You can give the voice command after hearing the confirmation sound.
You can check the warranty terms here:
https://www.energysistem.com/terms-warranty
Issuer's name: Energy Sistem Technology, S.A. - CIF: A53107488
Address: C/ Calpe, 1 - 03509 Finestrat, Alicante (Spain)
Tel: +34 966 830 324
We declare under our sole and exclusive responsibility that the product
Description: wireless sport earphones
Brand: Energy Sistem
Model: Earphones Bluetooth Sport 1+
Manufacturer: Energy Sistem Technology, S.A.
Manufacturing country: China
referred to in this declaration complies with the essential norms and standards
EN 300 328 V2.1.1
EN 301 489-1 V2.2.0
EN 301 489-17 V3.2.0
EN 62479:2010
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 16th April 2014.
Finestrat, 1st July 2021
Miguel Ángel Aragüez García
Innovation and Technology Director